|
Snap on Lid (CP)
|
Below are some more images and resources relating to this product
|
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
The machine is suitable for placing plastic lids on sealed trays and can be connected in the production line after a heatsealing machine.
The unit is composed of:
- Tray infeed belt connects into the intermittent chain of the unit.
- Intermittent motion chain to position the tray under the lidding tool.
- Bottom tool with the same shape as the tray to ensure centering under the lid. The upward movement of the bottom tool is driven by cam.
- Top tool with the same shape as the lid. The tool picks the lid from the magazine with suction cups, and the vacuum is produced by Venturi system. The movements of the top tool: lid pack, rotation and place are driven by two cams. During the pause of the intermittent conveyor, the bottom tool is lifted and at the end of the stroke, the tray is in contact with the lid which is snapped on.
- All the movements are mechanically controlled.
- Lid magazine.
- Lid magazine sector.
- Discharge belt.
Production: 1 closing head - 40 trays/min.
2 closing head - 80 trays/min.
Electric power consumption: 1,5 KW/h
Compressed air: 60 NL/min.
|
|
